KATEGORIE
Zpěz k nákupu
SCYTHE SCKTT-2100 Kotetsu Mark II Rev. B CPU Cooler
SCYTHE SCKTT-2100 Kotetsu Mark II Rev. B CPU Cooler
1802 Kč
1489 Kč bez DPH
Dostupnost: Ano, centrál. sklad
Part no.: SCKTT-2100
Kód produktu: 101352004
Výrobce: SCYTHE
Popis produktu
The Kotetsu Mark II Rev. B CPU cooler features compact dimensions and is designed for maximum compatibility. The overall height of only 154 mm and the asymmetrical design of the heat sink for maximum memory and graphics card compatibility form a convincing overall concept for installation in almost any standard housing. Four nickel-plated 6 mm copper heatpipes and an embossed top plate ensure an attractive and high-quality look. A new Kaze Flex II PWM fan is used for active cooling. In addition to a design change, the Kaze Flex II 120 PWM fan has an extended control range of 300 to 1,500 rpm. This enables higher cooling performance, while an adapted fan frame ensures increased air flow. A closed fluid bearing (Sealed Precision FDB) and rubberized decouplers enable smooth operation with an average service life of 120,000 hours. In the current revision, the user-friendly H.P.M.S IV mounting system offers full compatibility with Intel’s LGA1700 and AMD’s AM5 sockets.
Kaze Flex II 120 PWM Fan
The Kotetsu Mark II Rev. B is equipped with a new Kaze Flex II PWM fan featuring an increased control range of 300 to 1500 RPM. The self-contained liquid bearing (Sealed Precision FDB) reduces friction and wear to a minimum with the help of a special oil film and ensures a high level of stability and an average lifespan of 120,000 hours. Rubberized pads have a decoupling effect and prevent the transmission of any vibrations.
Asymmetrical and low height design
Aiming for maximum compatibility the heatsink is not centered above the baseplate, but slightly offset to the side and back. This assymetrical design allows for unrestricted use of all memory slots. It also points the heatsink away from the graphics card, leaving enough space for even the bulkiest GPU coolers. With a compact height of only 154 mm the Kotetsu Mark II Rev. B easily fits all standard PC Cases.
Hyper Precision Mounting System IV
The Kotetsu Mark II Rev. B CPU Cooler uses the updated H.P.M.S IV mounting system which offers full LGA 1700 and AM5 compatibility. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation process, the universal backplate is securely fixed to the mainboard by rubberized spacers, making the process considerably easier.
CPU Cooler Specification
Model Name
Kotetsu Mark II Rev. B CPU Cooler
Model Number
SCKTT-2100
EAN
4571225058214
Compatibility to Intel® Sockets
Socket LGA1150
Socket LGA1151
Socket LGA1155
Socket LGA1156
Socket LGA1200
Socket LGA1700
Socket LGA2011 / 2011-v3 (Square ILM)
Socket LGA2066
Compatibility to AMD® Sockets
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket AM4
Socket AM5
Socket FM1
Socket FM2
Socket FM2+
Overall Dimensions (WxHxD)
136 x 154 x 83 mm / 5.35 x 6.06 x 3.27 in (Including fan)
Weight
645 g / 22.8 oz (Including fan)
Accessory
Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.
Baseplate Material / Heatpipes
Nickel-plated Copper
Fan Specification
Model Name
Kaze Flex II 120 PWM
Model No.
KFS1225FD15-P
Fan Dimensions
120 x 120 x 26 mm / 4.72 x 4.72 x 1.02 inch
Noise Level
4 ~ 26 dBA
Fan Speed
300 (±200 rpm) ~ 1500 rpm (±10%)
Airflow
16.9 ~ 67.62 CFM / 28.7 ~ 114.88 m3/h
Connector
4-Pin PWM
Static Pressure
0.74 ~ 14.71 Pa / 0.075 ~ 1.50 mmH2O
Bearing
Sealed Precision FDB
Voltage
12 V
Amperage
0.16 A
MTTF
120,000 hours
Popis produktu
Kotetsu Mark II Rev. BThe Kotetsu Mark II Rev. B CPU cooler features compact dimensions and is designed for maximum compatibility. The overall height of only 154 mm and the asymmetrical design of the heat sink for maximum memory and graphics card compatibility form a convincing overall concept for installation in almost any standard housing. Four nickel-plated 6 mm copper heatpipes and an embossed top plate ensure an attractive and high-quality look. A new Kaze Flex II PWM fan is used for active cooling. In addition to a design change, the Kaze Flex II 120 PWM fan has an extended control range of 300 to 1,500 rpm. This enables higher cooling performance, while an adapted fan frame ensures increased air flow. A closed fluid bearing (Sealed Precision FDB) and rubberized decouplers enable smooth operation with an average service life of 120,000 hours. In the current revision, the user-friendly H.P.M.S IV mounting system offers full compatibility with Intel’s LGA1700 and AMD’s AM5 sockets.
Kaze Flex II 120 PWM Fan
The Kotetsu Mark II Rev. B is equipped with a new Kaze Flex II PWM fan featuring an increased control range of 300 to 1500 RPM. The self-contained liquid bearing (Sealed Precision FDB) reduces friction and wear to a minimum with the help of a special oil film and ensures a high level of stability and an average lifespan of 120,000 hours. Rubberized pads have a decoupling effect and prevent the transmission of any vibrations.
Asymmetrical and low height design
Aiming for maximum compatibility the heatsink is not centered above the baseplate, but slightly offset to the side and back. This assymetrical design allows for unrestricted use of all memory slots. It also points the heatsink away from the graphics card, leaving enough space for even the bulkiest GPU coolers. With a compact height of only 154 mm the Kotetsu Mark II Rev. B easily fits all standard PC Cases.
Hyper Precision Mounting System IV
The Kotetsu Mark II Rev. B CPU Cooler uses the updated H.P.M.S IV mounting system which offers full LGA 1700 and AM5 compatibility. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation process, the universal backplate is securely fixed to the mainboard by rubberized spacers, making the process considerably easier.
CPU Cooler Specification
Model Name
Kotetsu Mark II Rev. B CPU Cooler
Model Number
SCKTT-2100
EAN
4571225058214
Compatibility to Intel® Sockets
Socket LGA1150
Socket LGA1151
Socket LGA1155
Socket LGA1156
Socket LGA1200
Socket LGA1700
Socket LGA2011 / 2011-v3 (Square ILM)
Socket LGA2066
Compatibility to AMD® Sockets
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket AM4
Socket AM5
Socket FM1
Socket FM2
Socket FM2+
Overall Dimensions (WxHxD)
136 x 154 x 83 mm / 5.35 x 6.06 x 3.27 in (Including fan)
Weight
645 g / 22.8 oz (Including fan)
Accessory
Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.
Baseplate Material / Heatpipes
Nickel-plated Copper
Fan Specification
Model Name
Kaze Flex II 120 PWM
Model No.
KFS1225FD15-P
Fan Dimensions
120 x 120 x 26 mm / 4.72 x 4.72 x 1.02 inch
Noise Level
4 ~ 26 dBA
Fan Speed
300 (±200 rpm) ~ 1500 rpm (±10%)
Airflow
16.9 ~ 67.62 CFM / 28.7 ~ 114.88 m3/h
Connector
4-Pin PWM
Static Pressure
0.74 ~ 14.71 Pa / 0.075 ~ 1.50 mmH2O
Bearing
Sealed Precision FDB
Voltage
12 V
Amperage
0.16 A
MTTF
120,000 hours
