KATEGORIE
Zpěz k nákupu
Audio, video, TV
AUTO - MOTO
Dům a zahrada
Foto
Hračky
Chovatelské potřeby, Drogerie
Malé domácí spotřebiče
Počítače, notebooky
Sport, krása, zdraví, zábava
Velké spotřebiče
Výprodej ULTRA nízké ceny
Zdraví, wellness
Na vašem soukromí nám záleží
Delock záslepka 1x interní 19pin USB 3.0 > 2 x USB 3.0-A samice externí - low profile
495 Kč
409 Kč bez DPH
Dostupnost: Dodání 3-5 dní
Part no.: 82976
Kód produktu: 6673170
Výrobce: Delock
Váha: 0,075 kg
Záruka: 24 měsíců
Popis produktu
Specification
• Connector: internal 1 x 19 pin USB 3.0 pin header female
external 2 x USB 3.0-A female
• Cable gauge: 30 AWG data line
28 AWG power line
• Current output: max. 900 mA per each USB port
• Voltage: 5 V
• Data transfer rate up to: Super-Speed 5 Gb/s,
High-Speed 480 Mb/s,
Full-Speed 12 Mb/s,
Low-Speed 1.5 Mb/s
• Downwards compatible to USB 2.0 and USB 1.1
• Abwärtskompatibel zu USB 2.0 und USB 1.1
• Cable length: ca. 40 cm (without connector)
System requirement
• PC with a free slot
• Mainboard with a free 19 pin USB 3.0 pin header connector
Note: For operation of two devices at the same time, which require more than 900 mA for each device,
you may need to connect an additional power supply for the connected device.
Package content
• Slot bracket
Package
• Delock poly bag
Popis produktu
This low profile slotblech by Delock is most suitable for installation into a PC slot of a mini PC and expands your system by two external USB 3.0-A ports. Thus you can connect different USB 3.0 devices, like e.g. external enclosure, Card reader, memory etc. Since the USB 3.0-A interface is compatible to its forerunners USB 2.0 and USB 1.1, you can still use your existing USB devices.Specification
• Connector: internal 1 x 19 pin USB 3.0 pin header female
external 2 x USB 3.0-A female
• Cable gauge: 30 AWG data line
28 AWG power line
• Current output: max. 900 mA per each USB port
• Voltage: 5 V
• Data transfer rate up to: Super-Speed 5 Gb/s,
High-Speed 480 Mb/s,
Full-Speed 12 Mb/s,
Low-Speed 1.5 Mb/s
• Downwards compatible to USB 2.0 and USB 1.1
• Abwärtskompatibel zu USB 2.0 und USB 1.1
• Cable length: ca. 40 cm (without connector)
System requirement
• PC with a free slot
• Mainboard with a free 19 pin USB 3.0 pin header connector
Note: For operation of two devices at the same time, which require more than 900 mA for each device,
you may need to connect an additional power supply for the connected device.
Package content
• Slot bracket
Package
• Delock poly bag